Wall Mount Cabinets

WMCM Series
Unique Cable Management Features
- Two pair of #12-24 tapped mounting rails (depth adjustable)
- Offset mounting rails create nearly 3.5″ of dedicated cable management space between the rail and side
- Rails feature a horizontal/vertical cable tie down pattern and provisions for optional cable management “D” rings
- Nominal concentric conduit knockouts on top, bottom, and back of rear section
- Provisions on top and bottom for fan assembly
- Optional dust kit to protect equipment in contaminated areas
- 150mm x 25mm Standard door handle cutout
- Reversible mounting for left-hand or right-hand opening
- Color: Black, Winter White
Availabe in 24″, 36″ & 48″H; Plexi, Mesh and Solid Door Options
WDX Series
Strong and Secure
- Two pair of 3/8″ sq. (M6) mounting rails (depth adjustable)
- Front pair of rails is part of a depth adjustable inner frame that provides increased support for heavy equipment
- Removable rectangular gland plate on top of the rear section features nominal concentric conduit knockouts
- Removable gland plate on top of center section for fan assembly
- Optional dust kit to protect equipment in contaminated areas
- 150mm x 25mm Standard door handle cutout; easily install other handle options for increased security
- Welded back panel and support “shelf” completely eliminates deflection
- Color: Black
Availabe in 24″, 36″ & 48″H; Plexi, Mesh and Solid Door Options
WLP Series
Unique Features for Zone Cabling
- #12-24 tapped mounting brackets (19 or 23″ mounting) that can be vertically adjusted
- One pair of 4 RMU tilt brackets (WLPTOB) provide rear equipment access for punch down termination and one pair of stagger brackets (WLPSB) with up to 6 RMU of mounting space
- Multiple nominal concentric conduit knockouts on top, bottom, sides, and back
- Provisions on bottom for fan assembly
- 150mm x 25mm Standard door handle cutout; easily install
- other handle options for increased security
- Reversible mounting for left-hand or right-hand opening
- Color: Black
Availabe in 24″, 36″ & 48″ Height

WM Series
Standard Wall Mount
- Two pair of #12-24 tapped mounting rails (depth adjustable)
- Horseshoe knockouts allow already terminated cable to be installed or removed without having to disconnect
- Nominal concentric knockouts on top, bottom, and back of rear section
- Provisions on top and bottom for fan assembly
- Optional dust kit to protect equipment in contaminated areas
- Independent keyed locks on front door and rear section
- Reversible mounting for left-hand or right-hand opening
- Color: Black
Availabe in 24″, 36″ & 48″H; 18″ & 24″ Deep
WD Series Wall Mount
Increased Weight Capacity and Optional Caster Mounting
- Two pair of #12-24 tapped mounting rails (depth adjustable)
- 1″, 2″, 3″ and 4″ Nominal concentric knockouts on top, bottom, and back of rear section
- Provisions on top and bottom for fan assembly
- Optional dust kit to protect equipment in contaminated areas
- Independent keyed locks on front door and rear section
- Reversible mounting for left-hand or right-hand opening
- Optional casters available to deploy wall mount as free-standing
- Color: Black
Availabe in 24″, 36″ & 48″H; Plexi, Mesh and Solid Door Options
WE Series Wall Mount
Side Mounting of Servers
- Two pair of 3/8″ sq. (M6) mounting rails (depth adjustable)
- Mounts across three studs for increased stability
- Nominal concentric conduit knockouts and provision for fan assembly on top and bottom
- Color: Black
24″H x 36″D x 21″H
10 RMU
350 lbs. Weight Capacity
15WM Wall Mount
- One pair of #10-32 tapped mounting rails (depth adjustable)
- A security bit separates the body from the back panel for easy one-person installation
- “Spare” 1 RMU tab on back allows power strip mounting without taking up rail space
15″ x 22″ X 18″
7 RMU
100 lbs. Weight Capacity

NEMA 12K Wall Mounts
Protect Data in Harsh Indoor Environments
- Intended for indoor use to provide a degree of protection against dust, falling dirt, water, and non-corrosive liquids
- Two pair of #12-24 tapped mounting rails (depth adjustable)
- 2″ conduit knockouts on rear section
- Gland plates on center section can be removed for AC unit
- Front and rear draw latches and “T” handle maximize compression with the center section
- Bulb gasket creates a positive environmental seal for indoor use to protect against ingress of solid foreign objects
- Color: Black
Availabe in 24″, 36″ & 48″H; 24″ & 30″ Deep

SR and SRD Swing Racks
- #12-24 tapped mounting holes on front and rear of frame
- 180 degree positive stop with stay open hinge pins
- Obround pattern for cable cinch straps
- Color: Black
Availabe in 24″, 36″ & 48″H